Guide to Select the Best Longboard Trucks

Longboard trucks are basically T-shaped metal objects that are adjusted to the underside of the longboard deck and attaches to the wheels. If you want to build a complete skateboard, trucks are one of the most necessary components that you will need.  Every longboard requires two trucks. Longboard trucks differ from the standard skateboard trucks by size and because of that, longboard trucks and skateboard trucks cannot be used interchangeably.

Longboard trucks often come in “reversed” or “inverted” kingpins. A reverse kingpin truck is one which has the axle on the other side of the kingpin unlike a standard truck. Also, compared to skateboard trucks, longboard trucks have softer brushings which provides better flexibility. Trucks usually come in pairs when bought; however, you should keep in mind that trucks themselves consist of multiple parts which can be bought separately.

When buying trucks, the two things that you need to decide on are how wide you want your trucks to be and of course, whether you want a Standard Kingpin truck or a Reverse Kingpin Truck. By the time you are at the end of this page, you should have a clear basic idea on longboard trucks and how you can easily choose the kind that suits your needs. We will also help you out by letting you in on some of our favorite choices as you read on.

The main parts of a longboard truck are: Axle, Hanger, Kingpin, Bushing, and Baseplate.

longboard truck parts

Choosing the right longboard truck can be a bit of a challenge. But this guide will break it down for you. Let’s get started!

STEP 1: Choosing the perfect hanger width

 Make sure that the width of the longboard truck is as close to the width of the deck of your longboard as possible. The better the match, the greater the performance you will get from your setup. However, do not worry if your trucks are a tiny bit too wide or narrow compared to your deck, it shouldn’t affect the performance enough to notice. Keep in mind that all companies do not measure from the same points on the truck. Hence, it can be confusing to choose the right width of truck for your deck. It should help to know that if a company mentions the width in inches, it usually refers to the length of the axle. If a company mentions it in millimetres then the measurement refers to the width of the hanger alone. Since decks of 9 to 10 inches are most common in longboards, 9 inches to 10 inches axles or 150mm to 180mm hangers are considered to be the standard sizes for longboard trucks.

Here are few of our personal suggestions for standard sized longboard trucks:

Gullwing Sidewinder II Truck

Gullwing Sidewinder II TruckThis pair of trucks come in size of 10 inch and provides great stability. It has a rating of 5 on Amazon and praising reviews from countless users who absolutely loved the product. Some even went on to say that this pair of truck might just be the best pair of truck for longboards that is available on the market.

Bear Grizzly 852 181mm Skateboard Trucks

Bear Grizzly 852 181mm Skateboard TrucksThis is another awesome pair of trucks; this one however has a length of 9inches which speaks for itself on how good its sensitivity is. This set of trucks too has a rating of 5 on Amazon.com and the users/reviewers are absolutely obsessed with it.

STEP 2: Standard Kingpin or Reverse Kingpin?

You should choose the type of kingpin based on the way you wish to ride your longboard. If you are going to use your longboard for performing tricks then Standard Kingpin is the one that you need this is because, since the kingpin is placed behind the hanger it does not interfere during the performance. The standard kingpins are usually available in narrower sizes compared to the Reverse Kingpins.

Here are some Standard Kingpin trucks that are worth looking into.

Bear Grizzly 852 181mm Skateboard Trucks

Silver Standard Skateboard TrucksThis set of truck has a high rating of 4.5 on Amazon.com, not to mention the countless rave reviews. This truck not only provides high stability but also provides high sensitivity and flexibility. It is super sturdy and smooth and are also drilled for both long and short patterned board mounting holes.

INDEPENDENT Skateboard Trucks 129mm Silver Raw STAGE 11 7.75

INDEPENDENT Skateboard Trucks 129mm Silver Raw STAGE 11 7It is a high performance truck that comes with 356 T6 Aluminium hanger and baseplate, solid Chromoly steel axle, grade 8 kingpin and supercrush cushions with cylinder bottom. It also features superior turn and stability and are recommended for decks of size 7.4 inches to 8 inches.

.

Now for Reverse Kingpin trucks; these are the most popular kind of truck that is used for longboarding since they are not only responsive at slow speeds but also offers high stability and control at fast speeds. These trucks have kingpins that face outwards towards the nose and tail of the board. The reverse kingpin setups are mainly suitable for carving, transportation, freestyle and downhill.

Here are some Reverse Kingpin trucks that are worth looking into.

180mm Blank Black Longboard Trucks Reverse Kingpin

180mm Blank Black Longboard Trucks Reverse KingpinIt features a large turning radius and a high baseplate making for a taller ride. It has a 7 inch hanger which has a measure of approximately 9.6inches from axle to tip. It also comes drilled for both hole patterns.

Bear Grizzly 181mm 8.52 Gen 5 Longboard Skateboard Truck

IBear Grizzly 181mm 8.52 Gen 5 Longboard Skateboard Truckt features a large turning radius and a high baseplate making for a taller ride. It has a 7 inch hanger which has a measure of approximately 9.6 inches from axle to tip. It also comes drilled for both hole patterns.

Paris 180mm 50° RKP Truck

Paris 180mm 50° RKP TruckThis model features a 356.2 virgin aluminium gravity moulded baseplate and hanger. It has a 6-hole baseplate drilled to accommodate both drilling patterns. It also comes with divine 90a urethane bushing formula for ultimate rebound and vibration dampening.

STEP 3: Bushing Seat

Bushing SeatBushing seat is basically like a pocket positioned in the center of the hanger which supports the bushings and helps regulate the truck’s ability to turn. If you have decided to get a reverse kingpin truck, bushing seat is one of the major things for you to consider when deciding on a longboard truck. Tight bushing seats can greatly restrict movement and flexibility of the truck which is however an advantage for you if you are into freeriding and downhill. Bushing seats that are open or unrestrictive provides the trucks with high sensitivity to force. This is often suitable for transportation, carving, freestyle and other slower speed rides.

That’s all there is to it when choosing your longboard trucks. Just make sure that you pay special attention to the hanger width and the size of your deck before making a decision and of course, everything actually depends on how you plan on riding your longboard so definitely keep that in mind. We hope that this guide made it easier for you to choose the best trucks for your longboard. Have fun riding!